Had a chance to get out in the cool and do some head-to-head comparisons of four different .380 ACP pistols. Here they are:
I’m going to discuss the RM380 and the R380 together, since the first is the latest version of the latter. See, Rohrbaugh was sold to Remington about a year ago, and shortly thereafter Remington began to tweak the design of the R380 a bit, which I think was mostly an improvement.
The original Rohrbaugh was designed to be the perfect pocket pistol, with smooth edges in a *very* compact yet ergonomically-friendly package. And as my original review indicates, I thought it was a great gun.
The new RM380 is essentially the same design. They’ve changed the mag release from the European-style butt plate to a conventional side-button. They’ve given the grips more texture which make it easier to hold onto (many people who owned a Rohrbaugh added either a slip-on grip or some grip tape to accomplish the same thing). And they’ve added a slight beaver-tail to help keep the external DA hammer from pinching the web of the hand. They’ve made it so the slide locks back after the last round in the mag is fired. And they’ve made an additional magazine with a small extension which makes it even easier to shoot the gun. In my opinion, these are all improvements.
Changes which aren’t improvements? Well, the gun is lighter, at about 12.2 ounces (the Rohrbaugh was 13.5), and that contributed to increased felt recoil. The fit & finish are not nearly as nice as the R380. But then again, the Remington now costs about 1/3 what the original Rohrbaugh did.
Both guns have very basic sights. They are not guns to take to a competition at 25 yards. But both of them would pop 6″ spinners consistently at 7 yards. Both operated reliably, though I was just using hardball ammo — you’d want to select your preferred SD load and make sure that it shot out of your gun consistently and reliably.
The trigger on the Remington was still a VERY long pull. First time I shot it, I thought it was even worse than the Rohrbaugh in that regard. But after going back and forth between the two, I think it just felt longer, because in addition to being long it was fairly gritty and rough. That might clean up over time (this gun had less than 100 rounds through it), but it was noticeably worse than the Rohrbaugh.
I’ve done a brief review of the Glock 42 previously. What I said then still stands:
Comments: I did not expect to like this gun. I was REALLY surprised when I did. Seriously, it is the best-shooting Glock I’ve ever handled. For such a small gun, it fit my large hands comfortably and was easy to shoot well. With Glock quality and reliability, this may be the first .380acp I would seriously consider as a CCW gun.
I had done a previous review of the P238 with the classic 1911-style grips, which can be found here. This one was brand-new … literally, it had just been picked up at the store and then brought out to the range. And it has the Hogue-style grips and the finger extension on the mag, which I really liked.
The large front fiber optic sight made target acquisition fast and easy. The grips fit my large hands very well, and made it easy to shoot the gun accurately.
So, how did the four guns feel, shooting them head-to-head?
OK, a couple of notes first. We shot Remington UMC 95gr hardball ammo. We loaded up 6 rounds into each mag, then shot first one gun, then another, then another, then another. We mixed up the order of which followed which. And we shot at both 7 yards and 10 yards.
My personal preference for shooting? This order, with notes:
- Sig P238. Had the least perceived recoil and greatest accuracy. For fast, multiple hits it was great, getting back on target with minimal fuss. Very crisp and clean trigger.
- Glock 42. Slight sting from the recoil, accuracy almost as good as the Sig. Again, getting back on target was fast and easy. Trigger not as good as the Sig, but familiar to anyone who knows how any other Glock shoots.
- Remington RM380. The worst recoil of all four guns, but the improvements to the grips and the mag extension really make a difference for accuracy. The long, rough trigger almost moved this to #4.
- Rohrbaugh R380. The least accurate and the most difficult to get back on target for follow-up shots.
Now, I want to stress that all four guns were adequately accurate at 7 yards. Shooting fast, I could get at least 5 out of 6 within about a 12″ circle, and hit at least one or two hits on a 6″ spinner. Consistently. Since I don’t own any of these guns, I would expect that I could improve on that with practice. Of course, most Self Defense ammo is usually hotter, and would present more of a problem for recoil and target re-acquisition. But I still think all four guns would perform well.
That’s how I would rank the guns for shooting. But that isn’t the only factor in considering a gun for concealed-carry.
As I noted in my review, I don’t like having a “cocked & locked” pistol in my pocket. And if I’m going to have a CCW weapon in a holster, then I might as well step up to a full 9mm as opposed to a .380. So that’s a big strike against the P238 in my book, as nice a gun as I actually found it to be.
It also depends on exactly what you want out of your minimal CCW gun. Do you want the lightest? The thinnest? The smoothest? Or does shoot-ability matter more?
It’s a matter of personal preference. I think that I would rank my selection for concealed carry this way, with some brief explanation for each:
- Remington RM380. A really good choice for a light, thin, pocket pistol intended to be used as either a back-up or deep cover gun. But I’d spend some time working on smoothing out that trigger.
- Glock 42. Not as small or as light as the RM380. But much better sights, and a most stable platform in my hands. Meaning that I would consider it as a primary CCW, not just as a back-up.
- Rohrbaugh R380. Weighs about what the Glock does, but is the smallest/thinnest of all four.
- Sig P238. A great shooter. And if you’re willing to carry it cocked & locked in your pocket, then I can easily see how this could be anyone’s first choice. But for me, I’d want it in a belt holster (or shoulder rig), and that’s a big disadvantage — I might as well carry a much more powerful gun.
But hey, that’s just my calculation. Feel free to weigh in with your own.
As Frank said on Facebook this afternoon:
I knew when you got the 45 you wanted the 9mm too. It was only a matter of time.
Guilty as charged. Look what followed me home today:
Yup, a Boberg XR9-S: a new little brother for my XR45-S. As I did in that post, I thought I’d put up some comparison pix to give a sense of just how small this gun is, even though it really doesn’t feel like it when you hold it or shoot it.
Here it is again with the XR45:
And here’s the view that shows the thickness of both:
Yeah, there’s a difference. Here’s the XR9 with a Springfield EMP (also 9mm, 3″ barrel – the XR9 has a 3.35″ barrel):
And with my J-frame in .38 Special:
For grins, here it is on top of the J-frame:
OK, but how about in comparison to the classic premium pocket 9mm, the Rohrbaugh R9? Here ya go:
The R9 *is* a fantastic little gun, and I love it. I don’t love shooting it, though. The XR9 wins in that category. It will also handle +P ammo and holds one more round (7+1) than the Rohrbaugh. But it is a bit bigger:
Lastly, here it is with a Bond Arms derringer — a great little gun, with a variety of different barrels available. But there’s still just two shots in the derringer, and it actually weighs about 3 ounces more.
While I have shot this gun (it belonged to a good friend), and know it to be dependable, I do still want to make sure that it will be able to reliably digest my preferred SD loads. So more on that to come!
- .25 ACP
- .30 carbine
- .32 ACP
- .32 H&R
- .327 Federal Magnum
- .357 Magnum
- .357 SIG
- .38 Special
- .380 ACP
- .40 S&W
- .41 Magnum
- .44 Magnum
- .44 Special
- .45 ACP
- .45 Colt
- .45 Super
- .450 SMC
- .460 Rowland
- 6.5 Swedish
- 9mm Luger (9×19)
- 9mm Mak
- 9mm Ultra
- black powder
- Boberg Arms
- General Procedures
- Shotgun ballistics